nokia 4a0-104 practice test

Which of the following options are used to configure an MPLS signaling type to be used on an SDP?
(Choose 2)

• A. configure service sdp sdp-id gre create
• B. configure service sdp sdp-id create
• C. Idp
• D. Isp Isp-name

Which of the following encapsulation types on an Ethernet port support the provisioning of multiple
SAPs? (Choose 2)

• A. Dot1Q
• B. Q-in-Q
• C. ATM
• D. NULL
• E. Nil

Which tree in the CLI would you need to be in to add a QoS policy to a SAP?

• A. config>router#
• B. config>qos#
• C. config>port#
• D. config>service#

Which of the following commands is used to disable an Epipe service?

• A. config>service# epipe service-id shutdown
• B. config>service# vpws service-id shutdown
• C. config>service# service-id shutdown
• D. config>port# port-id shutdown.
• E. config>service# epipe service-id disable

Which of the following commands is required to configure an Ethernet port to be used as a SAP in a
service?

• A. Configure service sap sap-id access
• B. Configure port port-id Ethernet mode access
• C. Configure port port-id Ethernet mode network
• D. Configure port port-id mode access
• E. Configure port port-id mode network

Which of the following tasks must be carried out before deleting an Epipe service? (Choose 4)

• A. Shut down all SAPs associated with the service.
• B. Shut down all SDPs associated with the service.
• C. Delete all SAPs and SDPs associated with the service.
• D. Shut down all physical ports that are bound to a SAP.
• E. Delete the Customer ID.
• F. Shut down the service.

Which of the following SAPs will forward all tagged and untagged frames on the port? (Choose 2)

• A. sap 1/1/1
• B. sap 1/1/1:*
• C. sap 1/1/1:*.0
• D. sap 1/1/1:0*
• E. sap 1/1/1:0

A customer requests that their Layer 2 Ethernet service be configured to forward frames up to 9000
bytes. The service provider is using MPLS encapsulation. What is the minimum MTU setting for the
network ports?

• A. 9000
• B. 9004
• C. 9008
• D. 9022
• E. 9036

FRF.5 is a standard that describes which of the following requirements?

• A. ATM to Frame Relay translation.
• B. Frame Relay to Ethernet translation.
• C. ATM tunneling over a Frame Relay core network.
• D. Frame Relay tunneling over an ATM core network.
• E. Frame Relay tunneling over an MPLS/IP core network

Which of the following statements are TRUE regarding a fully meshed VPLS service with a default
setting? (Choose 3)

• A. The vc-id on the mesh-sdp must be explicitly configured.
• B. The vc-id on the mesh-sdp is automatically assigned by a PE using the service id.
• C. The VPLS service id, on all PE routers, does not have to match.
• D. The VPLS service id, on all PE routers, must match.
• E. If dynamic signaling is required, the signaling on all PE routers must be set to TLDP in the configuration of the SDPs.
• F. The signaling on all PE routers will default to TLDP in the configuration of the SDPs; therefore, no configuration change is required for dynamic signaling.