extreme networks ew0-300 practice test

Select the statements that apply when you compare and differentiate VRRP and ESRP.

• A. VRRP does not use the number of active ports as a criteria for Master election.
• B. VRRP can be enabled on VLAN default.
• C. VRRP and Spanning Tree can be enabled on the same switch and VLAN
• D. All of the above

The following MAC address, 00:00:5E:00:01:0A represents:

• A. The MAC address used for ESRP, instance 01.
• B. The MAC address used for ESRP, instance 10.
• C. The MAC address used for VRRP, instance 01.
• D. The MAC address used for VRRP, instance 10.

The Skew time in VRRP is used to ensure that two back-up routers do not switch to master state at
the same time in case of a failover situation.

• A. True
• B. False

Within VRRP the election process of becoming the master switch takes place with the following
precedence:
Step 1: The switch with the virtual router’s IP address becomes the master switch.
Step 2: The switch with the highest VRRP priority becomes the master switch.
Step 3: The switch with the highest IP address becomes the master switch.

• A. True
• B. False

When limit-learning is configured on a port and the limit is reached the following traffic still flows to
the port.

• A. Packets destined for the active Mac addresses
• B. Broadcast traffic
• C. EDP traffic
• D. All of the above

The following modes of operation are supported with the Network login feature. (Choose all that
apply)

• A. Secure mode
• B. Campus mode
• C. Quick Mode
• D. ISP mode

On a RADIUS server you can distinguish between switch access and Netlogin authentication. Extreme
provides a vendor specific attribute Extreme:Extreme-Netlogin-Only = disabled/enabled.
User authentication for both Netlogin and switch access is allowed when the value is disabled.
When the value is enabled user authentication is restricted to Netlogin only.

• A. True
• B. False

In ExtremeWare, what is the normal ACL behavior for incoming traffic when there is no default rule
configured?

• A. Explicit permit
• B. Explicit deny
• C. Implicit permit
• D. Implicit deny

Although you can specify sequence numbers for different ACL entries, the Summit 1i switch checks
incoming traffic on a match with the ACL entries in the order of their time in configuration.

• A. TRUE
• B. FALSE

What is the maximum number of ACL rules supported on an Extreme Networks Summit7i switch
without the default rule?

• A. 1
• B. 128
• C. 255
• D. Unlimited