axis ax0-100 practice test

Exam Title: Axis Network Video

Last update: Nov 27 ,2025
Question 1

Which of the following allows customer to access between 2-4 channels of live and online stored
video at any time?

  • A. AXIS Camera Station
  • B. AXIS Video Hosting System (AVHS)
  • C. AXIS Camera Management
  • D. AXIS Media Control
Answer:

B

vote your answer:
A
B
C
D
A 0 B 0 C 0 D 0
Comments
Question 2

Axis recommends shielded cables for outdoor installations primarily to ensure

  • A. Image quality.
  • B. Surge protection.
  • C. Life time of cable installations.
  • D. Conformity with SMPTE standard.
Answer:

B

vote your answer:
A
B
C
D
A 0 B 0 C 0 D 0
Comments
Question 3

In setting up PTZ control for an Axis encoder, it's very easy to overlook a very important step in the
configuration process. After properly connecting the communication wires to the encoder, the next
recommended step in the setup is:

  • A. Downloading the correct Device ID from the Axis website
  • B. Setting the Baud Rate to match the analog PTZ' s
  • C. Setting the Device ID to match the analog ID
  • D. Uploading the correct PTZ driver
Answer:

D

vote your answer:
A
B
C
D
A 0 B 0 C 0 D 0
Comments
Question 4

Which setting would best adjust a hard yellow tint as shown in the pictures below?

  • A. Image contrast
  • B. White balance
  • C. Color saturation
  • D. Image brightness
Answer:

B

vote your answer:
A
B
C
D
A 0 B 0 C 0 D 0
Comments
Question 5

Which is an impact on cameras that are operating above their specified temperature limit?

  • A. Noise is increased
  • B. Frame rate is reduced
  • C. Light sensitivity is decreased
  • D. Resolution is reduced
Answer:

A

vote your answer:
A
B
C
D
A 0 B 0 C 0 D 0
Comments
Question 6

Which technology can a Video Management Software (VMS) partner incorporate to reduce the
impact on recorded video during server maintenance?

  • A. Local storage at the camera
  • B. Meta data stream
  • C. AXIS Camera Application Platform (ACAP)
  • D. SNMP
Answer:

A

vote your answer:
A
B
C
D
A 0 B 0 C 0 D 0
Comments
Question 7

A customer has a lot of motion blur on recordings from a fixed camera. What would be the most
likely setting to address the blurring?

  • A. Gain level
  • B. Brightness
  • C. Backlight compensation
  • D. Shutter speed
Answer:

D

vote your answer:
A
B
C
D
A 0 B 0 C 0 D 0
Comments
Question 8

Which statement is true regarding H.264 and Motion JPEG?

  • A. The highest bandwidth savings using H.264 compared to Motion JPEG is at high frame rates
  • B. Bandwidth savings using H.264 has nothing to do with frame rate, only scene complexity
  • C. Bandwidth savings using H.264 has nothing to do with frame rate, only Group of Video (GOV) setting
  • D. The highest bandwidth savings using H.264 compared to Motion JPEG is at low frame rates
Answer:

A

vote your answer:
A
B
C
D
A 0 B 0 C 0 D 0
Comments
Question 9

Which of the following will allow a customer to have a PTZ camera automatically change between
three predefined positions?

  • A. Configure the camera's I/O ports to control the preset positions
  • B. Use the Guard Tour capability to switch between the preset positions
  • C. Switch between the predefined positions using a joystick
  • D. Use the auto tracking capability to switch between the preset positions
Answer:

B

vote your answer:
A
B
C
D
A 0 B 0 C 0 D 0
Comments
Question 10

In a network surveillance installation, the purpose of a router is to

  • A. Forward the video stream between networks.
  • B. Forward the video stream to the correct receiver within a network.
  • C. Separate audio and video traffic to reduce audio latency.
  • D. Separate the video stream from the camera control signaling.
Answer:

A

vote your answer:
A
B
C
D
A 0 B 0 C 0 D 0
Comments
Page 1 out of 14
Viewing questions 1-10 out of 145
Go To
page 2