avixa cts practice test

[Developing AV Solutions]
Network Quality of Service (QoS) is defined as

• A. the ability to prioritize the traffic in the network system.
• B. the ability to set the quantity of stations connected via the network.
• C. the ability to remotely manage network switches, routers and hubs via the network connection.
• D. a feature allowing the network administrator to monitor who is connected to the network at any given time.

[Developing AV Solutions]
A saeen is 144 in (3658 mm) wide and the throw ratio is 2.3:1. How far from the screen should the
projector be placed?

• A. 288 In (7303 mm)
• B. 302 in (7681 mm)
• C. 331 in (8413 mm)
• D. 446 in (11339 mm)

[Developing AV Solutions]
Which method of control is supported by HDBaseT?

• A. PCIE
• B. DAU
• C. RS-232
• D. DMX512

[Developing AV Solutions]
During project delivery and after completion, it is important to ensure correct management of
control system code so that

• A. programming costs will be within project budget.
• B. other contractors are unable to reuse or edit code.
• C. the most up-to-date version of code is available for upload when required.
• D. sub-contract programmers submit uncompiled code as per their contract of employment.

[Developing AV Solutions]
Assuming a 10' (3 m) ceiling, what is the approximate volume of this room?

• A. 300 cubic ft (8.5 m3)
• B. 600 cubic ft (17 m3)
• C. 1500 cubic ft (42.5 m3) o
• D. 6000 cubic ft (162 m3)

[Developing AV Solutions]
The BEST way to ensure that a project is on budget is to

• A. calculate the number of calendars days remaining to completion.
• B. visit the job site and determine the percentage of work completed.
• C. ask the installation team to estimate remaining work to completion.
• D. review accrued labor and material costs against remaining work.

[Operating AV Systems]
Maintaining AV operations includes which of the following?

• A. conforming to DISCAS
• B. measuring system SPL
• C. updating control system firmware
• D. comparing NAG and PAG calculations

[Developing AV Solutions]
How frequently should a personal fall arrest harness be inspected?

• A. weekly
• B. before each use
• C. at the beginning of each project
• D. at the beginning of each work day

[Developing AV Solutions]
When discussing a proposed audiovisual project with a new customer, it is important for the
salesperson to FIRST

• A. conduct a survey of end users to determine the project goals.
• B. prepare a detailed layout of the equipment and cabling requirements.
• C. identify the key decision makers and stakeholders in the client's organization.
• D. consult with the project manager to determine the availability of staff to complete the installation.

[Developing AV Solutions]
Project documentation states the system must logically Isolate control and media networks. What
piece of network equipment should be used?

• A. router
• B. access point
• C. managed switch
• D. unmanaged switch