a10 networks a10 system administration practice test

You upgraded the boot image and changed the boot pointer to the new image using bootimage
command. Which of the following operations will load the new image?

• A. reload
• B. restore
• C. system-reset
• D. shutdown –r
• E. restart
• F. reboot

Device 1 is the vMaster in a virtual chassis. Select the command set that adds an IP address to VE
interface 200 on device 3?

• A. interface ve 200 device 3 ip address 198.162.4.1 /24
• B. interface device-context 3 interface ve 200 ip address 198.162.4.1 /24
• C. interface ve 3/200 ip address 198.162.4.1 /24
• D. vcs device-context device 3 interface ve 200 ip address 198.162.4.1 /24

Given the following configuration, which statement describes Alice’s partition access rights?

• A. Alice can access the partitions alpha and beta partition, but not the shared partition.
• B. Alice can access the partitions alpha, beta, as well as the shared partition.
• C. Alice can access either the alpha or beta partitions, but cannot access them both.
• D. Alice can access the shared partition provided she is not currently accessing the alpha or beta partition.

In the following configuration:

Where network 3.0.0.x on each device is on a VE interface dedicated to aVCS traffic, what must you
do to ensure that command “device-context x” always succeeds?

• A. Verify the interface is untagged on each device.
• B. Enable management service ssh on that interface for each device.
• C. Configure vcs floating-ip on network 3.0.0.0 /24.
• D. Apply acl ”permit 3.0.0.0 /24” on that interface for each device.

Which statement correctly describes the following configuration?
snmp enable traps slb-change server
snmp enable traps slb-change server-port
snmp enable traps slb-change vip
snmp enable traps slb-change vip-port

• A. These commands enable SNMP traps for any SLB changes
• B. These commands enable SNMP traps for only SLB changes related to virtual-server
• C. These commands only enable SNMP traps for the creation or removal of virtual and real servers and ports
• D. These commands enable SNMP traps for only SLB changes related to real-servers

In a VRRP-A topology that contains four devices, select the number of devices on which a single VRID
can be simultaneously active?

• A. 1
• B. 2
• C. 3
• D. 4

How are aVCS changes that are performed on the vMaster pushed to the vBlades?

• A. HA Sync needs to be done
• B. VRRP-A should be failed over
• C. Automatically
• D. aVCS reload has to be performed

When private partitions are created on a device where VRRP-A is enabled, which statement is true?

• A. No VRIDs are configured on a private partition until explicitly configured.
• B. VRID 0 is configured with settings identical to VRID 0 on the shared partition.
• C. All VRIDs on the shared partition are replicated on the private partitions.
• D. VRID 0 is configured with its default settings.
• E. VRRP-A is not available on private partitions.

Select the statement that describes aXAPI authentication and authorization requirements:

• A. aXAPI requires that users are assigned to the “aXAPI” role before they can execute a script.
• B. aXAPI is subject to the same permissions requirements as the CLI and GUI.
• C. aXAPI has special permissions that differ from CLI and GUI permissions.
• D. aXAPI is subject to authorization but not authentication requirements.

Which of the following statements are true about Application Delivery Partitions?
1) The same virtual ethernet interface can be used by multiple private partitions
2) An untagged ethernet interface is visible only within the partition in which it is configured

• A. 1 is true; 2 is false
• B. 1 is false; 2 is true
• C. 1 and 2 are both true
• D. 1 and 2 are both false